DMK047 15W -150W
Features
- Pressure clamp connectors
- Dynamic heating up
- Wide voltage range
- Temperature limiting
- Energy saving
- Din-rail mounting
- Quick installation
These heaters are used in enclosures where damage from condensation must be prevented, or where the temperature may not fall below a minimum value. The aluminium profile heater body design has a chimney effect and distributes the heat evenly. The pressure clamp connectors save time and simplify installation.
| Technical Data |
| Operating voltage | 120-240V AC / DC *( min .110 V,max .265 V ) |
| Heating element | PTC resistor , self regulating and temperature limiting |
| Heater body | Extruded aluminium profile , anodised |
| Connection | 3 pressure clamps for stranded wire 0.5-1.5mm
2 ( with wire end ferrule ) and rigid wire 0.5-1.5mm |
| Connection casing | Plastic according to UL94 V -0, black |
| Mounting | Clip for 35mm DIN rail, EN 60715 |
| Installation position | Vertical |
| Operating / Storage temperature | - 20 to +70℃(-4 to +158° F ) |
| Protection type/Protection class | IP54 / I ( earthed ) |
| Heating capacity | Inrush current max. | Length (L) | Weight (approx.) |
| 10W | 1.5A | 65mm | 0.30kg |
| 30W | 3.0A | 65mm | 0.30kg |
| 55W | 3.5A | 140mm | 0.40kg |
| 80W | 4.0A | 140mm | 0.50kg |
| 100W | 4.5A | 140mm | 0.50kg |
| 150W | 9.0A | 220mm | 0.70kg |
*Product Specifications Subject To Changes Without Prior Notice
Features
- Wide temperature range setting
- Compact
- Simple to mount
- High switching performance
DMO1140: Thermostat (normally closed),contact breaker for regulating heaters.
DMS1141: Thermostat(normally open), contact maker for regulating of filter fans and heat exchangers or for switching signal devised when temperature limit has been exceeded.
| Technical Data |
| Temperature switch difference | 7K (±4K tolerance) |
| Sensor element | Thermostatic bimetal |
| Contact type | Snap-action contact |
| Contact resistance | < 10m Ω |
| Service life | > 100,000 cycles |
| Max . Switching capacity | 250VAC , 10 (2) A
120VAC , 15 (2) A
DC 30W |
| Connection | 2-pole terminal , clamping torque 0.5 Nm max .: rigid wire 2.5 mm
2 stranded wire ( with wire end ferrule ) 1.5 mm |
| Mounting | Clip for 35mm DIN rail,EN60715 or for Cxit filter EF 118 Series |
| Casing | Plastic according to UL94 V-0 , light grey |
| Dimensions | 60 x 33 x 43 mm |
| Weight | Approx . 40g |
| Fitting position | Variable |
| Operating / Storage temperature | - 20 to +80℃(-4 to +176° F ) /-45 to +80℃(-49 to +176° F ) |
| Protection type | IP20 |
*Product Specifications Subject To Changes Without Prior Notice
Cable Ties
| Model | L | W (mm) | Bundle Diameter (mm) | Min. Loop Tensile Strength |
| Inches | MM | | | KGS | LBS |
| CHS-4" | 4 | 100 | 2.5 | 4-22 | 8 | 18 |
| CHS-6" | 6 | 150 | 3.6 | 3-35 | 18 | 40 |
| CHS-8" | 8 | 200 | 4.8 | 3-50 | 22 | 50 |
| CHS-10" | 10 | 250 | 4.8 | 3-65 | 22 | 50 |
| CHS-4.8 x 300 (12") | 11 5/8" | 300 | 4.8 | 3-82 | 22 | 50 |
| CHS-8 x 300 (12") | 11 5/8" | 300 | 7 | 4-82 | 55 | 120 |
| CHS-8 x 350 (14") | 13 3/4" | 350 | 7.9 | 4-90 | 55 | 120 |
| CHS-8 x 400 (16") | 15 3/4" | 400 | 7.9 | 4-105 | 55 | 120 |
| CHS-8 x 450 (18") | 17 3/4" | 450 | 7.9 | 4-118 | 55 | 120 |
| CHS-8 x 500 (20") | 19 11/16" | 500 | 7.9 | 4-150 | 55 | 120 |
| CHS-9 x 550 (22") | 21 11/16" | 550 | 9 | 8-160 | 80 | 175 |
| CHS-9 x 650 (26") | 25 9/16" | 650 | 9 | 8-190 | 80 | 175 |
| CHS-9 x 760 (30") | 30 | 760 | 9 | 10-225 | 80 | 175 |
Cable Tie Mounts
| Model | L x W (mm) | H (mm) | T (mm) |
| CHS-HWA-3 | 20 x 20 | 6.1 | 5 |
| CHS-HWA-4 | 30 x 30 | 8.7 | 6.4 |
*Product Specifications Subject To Changes Without Prior Notice
Revolving lights
| Model | LED-1101JW |
| Voltage | Multi Voltage: 12VAC/DC, 24VAC/VDC, 110VAC/DC, 220VAC |
| Mounting | Screw Mounting |
| Sound | With Buzzer |
| Power Consumption | 10W |
| Lighting Type | LED |
| Flashing Rate | 90-150/Min |
| Colours Available | Red/Amber/Blue/Green |
Tower lights
| Model | LTA-1 / LTA-1J (with buzzer) | LTA-2 / LTA-2J (with buzzer) | LTA-3 / LTA-3J (with buzzer) |
| No. of Stages | 1 | 2 | 3 |
| Voltages Available | 12VDC / 24VDC / 110VAC / 220VAC | 12VDC / 24VDC / 110VAC / 220VAC | 12VDC / 24VDC / 110VAC / 220VAC |
| Colours Available | Red/Amber/Green/Blue/White | Red/Amber/Green/Blue/White | Red/Amber/Green/Blue/White |
*Product Specifications Subject To Changes Without Prior Notice
Miniature Power Relays
- Available in 2 Poles (MY2N) and 4 Poles (MY4N)
- Comes with operational indicator lights
- Sockets PYF08A-E (for use with MY2N) and PYF14A-E (for use with MY4N) available
- Coil Voltages available in: 12VAC, 24VAC, 110VAC, 230VAC, 12VDC, 24VDC
61FGP-N Floatless Level Relay
- Supply Voltage: 230VAC, 50/60Hz
- Operating Voltage Range: 85% – 100% of Rated Voltage
- Inter-Electrode Voltage: 8VAC
- Inter-Electrode Current: Approximately 1mA AC max
- Response Time: Operate – 80 ms max ; Release – 160ms max
- Control Output: 1A, 250VAC (Inductive load) ; 3A, 250VAC (Resistive load)
- Operating Ambient Temperature: 0°C to +55°C
- Operating Humidity: 45% to 85% RH
*Product Specifications Subject To Changes Without Prior Notice
Filter guard
Material: ABS
IP Protection: IP40
Colours Available: Beige, Grey, Black
| Model | Dimensions (mm) | Suitable for Fan Size (mm) |
| 3" | 87 x 87 | 80 x 80 |
| 3 1/2" | 97 x 97 | 92 x 92 |
| 4" | 126 x 126 | 120 x 120 |
| 6" | 180 x 162 | 172 x 150 |
Ventilator filter
Material: ABS
IP Protection: IP44
Colours Available: RAL 7032 / RAL 7035
| Model | Dimensions (mm) | Suitable for Fan |
| RT 150 | 148.5 x 148.5 | 4" |
| FU 200 | 204 x 204 | 6" |
Ventilator filter with hood
Material: ABS
IP Protection: IP55
Colour: RAL 7035
| Model | Dimensions (mm) | Suitable for Fan |
| FU 9801 | 109 x 109 | 3" |
| FU 9802 | 121 x 121 | 3 1/2" |
| FU 9803 | 148.5 x 148.5 | 4" |
| FU 9804 | 204 x 204 | 6" |
*Product Specifications Subject To Changes Without Prior Notice
DEMEX 24 HR TIME SWITCH
Function
- Analogue time switch, 1 channel
- Daily/24 hours program
- 48 switching segments
- DIN rail installation
- Synchronised with mains
- Shortest switching time: 30 Minutes
- With power reserve 150 hours
Technical data
- Voltage rating: 110-230VAC 50/60Hz
- Voltage limit: 100-240 VAC
- Width: 3 Modules
- Installation type: DIN-rail
- Program:Daily (24hours) Program
- Power reserve: 150 hours
- Max: switching capacity at 250 VAC, cosф = 1: 16A
- Max. switching capacity at 250VAC, cosф = 0.6: 4A
- Shortest switching time: 30 minutes
- Programmable every: 30 minutes
- Time accuracy: ≤ ± 1s/ day (Quartz)
- Power consumption: 1 VA
- Ambient temperature: -20°C ~ +55°C
- Manual switch with 2 positions: AUTO/ Permanent OFF
AHC-15 DIGITAL TIME SWITCH
Function
- DIN RAIL installation
- LCD display, Day/week program
- 18 ON/OFF programs
- 18 times pulse programs
- Lithium battery power reserve: 3 years
- Auto time should be error correction ±30 sec, weekly
Technical data
- Voltage rating: AC220V 50/601-Iz
- Voltage limit: AC 180V~250V
- Hysteresis: ≤ 2sec/day (25°C)
- On/ off operation: 18 on & 18 off, 18 times pulse
- Power consumption: 5VA (max)
- Display: LCD
- Service life: Mechanically l07 ; Electrically 105
- Minimum interval: minute (pulse/ cycle l s)
- Weight: approx 150g
- Time basis: quartz
- Ambient humidity: 35 ~ 85%rh
- Ambient temperature: -10 ~ +-40°C
- When the battery reserve is in use, the battery mark on the LCD display will be indicated. When in use in power mode, the battery mark will not be indicated.
- Count down: 1 sec-99 min 59 sec
- Pulse: 1 sec-59min 59 sec
- Switching power: 16A 250VAC(cosф=1); 10A 250VAC (cosф=0. 6)
Incandescent lamp load: 2300W
Halogen lamp load: 2300W
Fluorescent lamps: Non compensated, series compensated; 1000VA, Parallel compensated 400VA (42µf)
- Switching contact: 1 changeover switch
- Power reserve: 3 years (lithium battery)
*Product Specifications Subject To Changes Without Prior Notice
